Our Top Picks
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Buying Guides › 7 Best Band Saws (November 2026)
Choosing a band saw starts with a question that has nothing to do with brand: how thick are the boards that need to be cut, and how much floor space is available? A 9-inch benchtop saw can sit on a shelf and still make curves in thin stock, while a 14-inch floor-standing machine with deep resaw capacity can slice a thick plank into veneer but needs a dedicated corner and, in some cases, a heavier electrical circuit. Mixing those two expectations is the most common reason buyers end up disappointed.
This comparison is for hobby woodworkers, makers, and small-shop owners weighing compact benchtop models against larger cabinet-style machines, plus one cordless portable saw for a different type of job. The assessments below rely on the numbers printed in each product title, including throat size, motor rating, speed options, resaw capacity, and included stands. Anything not stated there, such as blade length or dust port size, should be confirmed on the listing before ordering in 2026.
Quick Picks
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
| Product | Best for | Key spec from the title |
|---|---|---|
| WEN BA3959 | Entry-level curve cutting | 9-inch, 2.8-amp benchtop |
| SKIL BW9501-00 | Hobby benchtop work with speed choice | 2.8-amp, 9-inch, 2-speed |
| WEN BA3962 | Benchtop saw bundled with a stand | 10-inch, 3.5-amp, two-speed, stand |
| RIKON 10-3062S | Upgraded 10-inch with easy setup | 1/2 HP, two blade speeds, tool-less guides |
| JET JWBS-14SFX | Serious resawing | 14-inch, 1.75 HP, 13-inch deep-cut resaw |
| JET JWBS-14CS | Enclosed-stand shop saw | 14-inch, 1 HP, 6-inch resaw, cabinet stand |
| DEWALT DCS374B | Portable cutting of pipe and stock | 20V MAX, 5-inch cutting capacity, bare tool |
How to Choose
Size the throat and resaw height to the stock
Wheel diameter sets the throat, which is the distance from the blade to the frame and limits how wide a board can be cut. Nine- and ten-inch saws handle small projects, scrollwork, and thin stock. Fourteen-inch models, such as the two JET machines here, move into furniture-scale work. Resaw height, listed as 13 inches for one JET and 6 inches (12 with a riser kit) for the other, tells you how thick a board can be split on edge.
Look at motor rating and speed options
Benchtop saws list motors in amps, such as 2.8 or 3.5, while larger machines use horsepower, such as 1/2, 1, or 1.75. Two blade speeds, shown on several models, let a buyer slow the blade down for harder or thinner material. Machines that run on 115/230V or call for a 20A circuit need that wiring ready before delivery, so check the outlet first.
Think about stands, guides, and tension
Stands add real money and floor-space considerations. A saw that includes a stand or an enclosed cabinet base removes one purchase, while a bare benchtop unit needs a sturdy bench. Tool-less guides and quick-release tension, as listed on the RIKON, speed up blade changes. Budget saws cut corners with lightweight tables, basic guides, and blade-tracking adjustments that take patience.
Decide whether a portable saw is the right category
The cordless DEWALT is a handheld band saw, not a stationary woodworking machine. It excels at cutting stock to length, pipe, and conduit on site, but cannot replace a table-style saw for resawing or detailed curves. Buyers should also note that the title says bare tool, so a battery and charger are separate. Always wear eye protection, keep fingers clear of the blade path, and follow the manual.
The 7 Best Options
WEN BA3959
This 9-inch benchtop saw with a 2.8-amp motor is the simple entry point to band sawing. Its small footprint suits garage shelves, craft rooms, and hobbyists who mostly cut thin stock and gentle curves.
- Strength: a compact 9-inch format keeps the machine easy to store and move.
- Strength: the modest motor rating fits light hobby tasks.
- Trade-off: a small throat and benchtop size limit thick or wide material.
Because it is a plain benchtop unit, it works best bolted or clamped to a sturdy bench so vibration does not interfere with tracking. Buyers should check the listing for table size and blade length, and plan on replacing the stock blade with one matched to the material. Skip it if resawing thick hardwood is on the agenda, since larger-capacity machines in this group are better matched to that work.
SKIL BW9501-00
SKIL pitches this benchtop model at woodworkers who want a bit of control over blade speed. The title lists a 2.8-amp motor, a 9-inch size, and two speeds, which suits both softwood and tougher material.
- Strength: two speeds give more flexibility than a single-speed design.
- Strength: the 9-inch footprint is ideal for small workshops.
- Trade-off: it shares the compact throat limit common to 9-inch saws.
It fits maker projects such as toys, signs, and small boxes, where the slower setting helps when working near tight curves. Pairing it with a narrow blade for scrollwork and a wider one for straight cuts is a sensible way to get more out of a compact machine. Skip it if a stand is wanted in the package, because the title does not mention one, or if long, thick cuts are routine.
WEN BA3962
Stepping up in size, this 10-inch saw adds a 3.5-amp motor, two speeds, and a stand. That bundle suits a buyer who does not have a spare bench and wants a standing-height setup right away.
- Strength: the stand is included, which removes a separate purchase.
- Strength: a larger 10-inch wheel size and stronger motor rating than the 9-inch WEN.
- Trade-off: it still belongs to the light-duty benchtop class rather than the shop-saw class.
It fits growing hobby shops where floor space is limited but a stable standing-height setup is wanted from day one. Buyers should still confirm assembly requirements and table dimensions on the listing, since those details are not in the title. Skip it if deep resawing or all-day production work is expected, because the 14-inch JETs are meant for heavier use.
RIKON 10-3062S
RIKON’s Deluxe 10-inch saw comes with a stand, a 1/2 HP motor, two blade speeds, and tool-less guides, along with quick-release tension. Those details point to a saw designed for faster setup and cleaner blade changes.
- Strength: tool-less guides and quick-release tension cut down on adjustment time.
- Strength: the 1/2 HP rating and stand make it a step above basic benchtop models.
- Trade-off: the 10-inch format still limits throat and resaw height.
It suits a woodworker who changes blades often between curves and straight cuts, because less time spent fiddling with tension and guide settings means more time cutting. The cast-iron table mentioned in the full listing is also worth confirming for flatness and finish. Skip it if budget is the main driver, since simpler 9-inch saws cost less, or if thick resawing is required.
JET JWBS-14SFX
This 14-inch woodworking saw is the heavy hitter in the group, with a 1.75 HP motor and a 13-inch deep-cut resaw capacity. It runs on 115/230V single-phase power, and the title recommends a 20A circuit, along with a 5-year warranty note.
- Strength: 13-inch resaw capacity opens up wide-board and veneer work.
- Strength: 1.75 HP gives the motor more authority for demanding cuts.
- Trade-off: it needs shop space, a suitable circuit, and a larger investment.
It fits serious furniture makers and small commercial shops that regularly slice wide boards into thinner stock. The dual-voltage listing means buyers should confirm which wiring their shop supports before the machine arrives, and a dust collection plan is wise for a saw this size. Skip it if the work is occasional hobby cutting, where a smaller saw does the job at lower cost.
JET JWBS-14CS
Another 14-inch model, this one comes with an enclosed cabinet stand and a 1 HP motor. The title lists 6-inch resaw capacity, or 12 inches with a riser kit, and compatibility with 115/230V single-phase power.
- Strength: the enclosed stand adds stability and storage space.
- Strength: the riser kit option extends resaw height to 12 inches.
- Trade-off: base resaw capacity of 6 inches trails the JWBS-14SFX.
It suits woodworkers who want 14-inch capability and tidy cabinetry, with the enclosed base helping to keep blades and accessories close at hand. Buyers planning thick resaw cuts should factor in the cost of the riser kit from the start rather than treating it as an afterthought. Skip it if maximum resaw height without add-ons is the goal, because the other JET offers more.
DEWALT DCS374B
This cordless 20V MAX band saw is a different tool entirely. The title mentions 5-inch cutting capacity, integrated hang hooks, and a portable design for deep cuts, and it is sold as a bare tool.
- Strength: battery power makes it easy to carry to a job site or across a yard.
- Strength: hang hooks allow it to be stored or set aside between cuts.
- Trade-off: the battery and charger are not included, and it cannot do bench-style curve work.
It fits tradespeople who cut stock, pipe, or conduit on site, as well as remodelers who want to avoid dragging a cord around. Blade choice should match the material being cut, and the workpiece should be clamped firmly before the trigger is pulled. Skip it if a workshop band saw for resawing or scrollwork is the real need.
Which One Fits Your Situation
Small garage shop and tight budget
The WEN BA3959 or the SKIL BW9501-00 keep floor space and cost low. The SKIL adds a second speed, which helps when moving between materials.
Growing hobby shop without a bench
The WEN BA3962 and RIKON 10-3062S both include stands. The RIKON adds quick-release tension and tool-less guides for faster blade changes.
Furniture making and resawing
The JET JWBS-14SFX offers the most resaw capacity of the group, while the JET JWBS-14CS adds a cabinet stand and a riser-kit upgrade path.
On-site cutting of stock and pipe
The DEWALT DCS374B is the one to consider, as long as a compatible 20V battery and charger are already on hand.
Common Mistakes
- Buying a 9-inch saw and expecting it to resaw thick hardwood.
- Forgetting that 115/230V machines with a recommended 20A circuit may need new wiring.
- Assuming a bare-tool portable saw includes a battery and charger.
- Skipping blade tension and tracking adjustments, which affect cut quality more than motor size.
- Ignoring eye protection and keeping hands too close to the blade.
Related guides
- Air Filtration Systems For Woodworking Shops
- Portable Power Stations For Camping Tools
- Laser Distance Measurers For Outdoor Use
Frequently Asked Questions
Is a 14-inch band saw worth the extra space?
For furniture-scale resawing and wider cuts, yes. For small craft projects, a 9- or 10-inch benchtop model is usually enough and far easier to store.
What does resaw capacity mean?
It is the maximum board height that can be cut on edge. A 13-inch figure means wide boards can be split into thinner pieces, while a 6-inch figure suits narrower stock.
Do the benchtop saws need a stand?
Benchtop models must sit on a solid, level surface. The WEN BA3962 and RIKON 10-3062S list stands in their titles, while the smaller 9-inch saws do not.
Can the cordless DEWALT replace a shop band saw?
No. It is a portable cutting tool for stock and pipe. A stationary saw is better for curves, resawing, and repeatable shop work.
Related guides
Worth a look next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.













Write Your Review
No reviews yet. Be the first to share your experience!