Key takeaways
- Compare the best right angle drills for cabinets, stud bays and tight corners, with head length, torque, chuck and battery platform specs for each pick.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Right Angle Drills for Tight Spaces and Cabinets
- Top Pick: Milwaukee 2415-21 M12 Right Angle Drill/Driver Kit
- Runner-up: Milwaukee 2615-21CT M18 Right Angle Drill Kit
- Also consider: Makita DA3010F Corded Angle Drill
The best right angle drill for most woodworkers and DIY users is the DEWALT DCD740B, because its dual speed ranges and short 4.0-inch front-to-back body cover both careful screw driving and faster hole drilling inside cabinets and between studs. If you already own Milwaukee M12 batteries, the Milwaukee 2415-21 kit is the lighter, more compact alternative, while the Milwaukee 2615-21CT steps up to the M18 platform for more speed. The Ryobi P241 is the budget-friendly pick for ONE+ owners, and the corded Makita DA3010F suits anyone who wants steady power without managing batteries.
A right angle drill turns the chuck 90 degrees from the handle, so the bit points sideways instead of straight ahead. That geometry is what lets you drill inside a cabinet box, bore through a stud in a narrow bay, or drive screws where a standard drill body simply will not fit. The five picks below are compared on the specifications that matter most for this tool type: head length, torque, speed range, chuck design and battery platform.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- DEWALT DCD740B 20V MAX Right Angle Drill
- Milwaukee 2415-21 M12 Right Angle Drill/Driver Kit
- Milwaukee 2615-21CT M18 Right Angle Drill Kit
- Ryobi P241 18V ONE+ Right Angle Drill
- Makita DA3010F Corded Angle Drill
- How to Choose a Right Angle Drill
- FAQ
- Conclusion
DEWALT DCD740B 20V MAX Right Angle Drill
The DCD740B is the most versatile pick here because it is the only cordless model in this roundup with two mechanical speed ranges. The low range tops out at 650 RPM for driving screws with control, and the high range reaches 2,000 RPM, which speeds up drilling in wood and light metal. That flexibility makes it a sensible single right angle drill for cabinet installation, electrical rough-in and general shop work.
The body measures 4.0 inches from front to back, short enough to work between studs on standard 16-inch centers with room to spare for a bit. The 3/8-inch ratcheting chuck has a deep hex pocket that accepts a full 2-inch hex bit, which shortens the working length even further when driving. A multi-grip trigger can be reached from several hand positions, a real advantage when the tool is wedged into an awkward corner. It is a mid-range, tool-only purchase, so it makes the most sense if you already own DEWALT 20V MAX batteries.
Specs:
- Model: DCD740B
- Battery platform: DEWALT 20V MAX, tool only
- Speed ranges: 0-650 and 0-2,000 RPM
- Chuck: 3/8-inch metal ratcheting with deep hex pocket
- Front-to-back length: 4.0 inches
- Weight: 3.25 lb, tool only
- Extras: multi-grip trigger, belt hook
- Warranty: 3-year limited
Milwaukee 2415-21 M12 Right Angle Drill/Driver Kit
The 2415-21 kit is the compact specialist of this group. Its head measures just 3-3/4 inches, the shortest here alongside the M18 Milwaukee, and the tool itself weighs only about 2 pounds, so it is easy to hold overhead or at arm’s length inside a cabinet. Because this listing is a kit, it includes an M12 battery pack, a 30-minute charger and a carrying case, which makes it a complete starter package for the M12 platform.
Torque is a modest 100 in-lbs, and the single speed range runs to 800 RPM, so this drill is built for pilot holes, flat-pack assembly, hardware installation and light fastening rather than large spade bits. The electronic clutch offers 11 settings plus a drill mode, and the chuck LEDs double as a clutch indicator, which helps prevent overdriven screws in cabinet work. Built-in LEDs light the work surface and an on-board fuel gauge shows the remaining charge. This is a budget to mid-range pick that rewards users who value access and control over raw power.
Specs:
- Model: 2415-21 kit (2415-20 tool)
- Battery platform: Milwaukee M12
- Speed: 0-800 RPM, variable
- Maximum torque: 100 in-lbs
- Chuck: 3/8-inch single-sleeve ratcheting with spindle lock
- Head length: 3-3/4 inches
- Clutch: electronic, 11 settings plus drill mode
- Drilling capacity in wood: 3/8-inch twist bit, 1-inch spade bit
- Kit includes: M12 battery pack, 30-minute charger, carrying case
- Extras: LED work light, on-board fuel gauge, extended paddle switch
Milwaukee 2615-21CT M18 Right Angle Drill Kit
The 2615-21CT brings the same compact head concept to Milwaukee’s 18V M18 platform. It delivers 125 in-lbs of torque and a 0-1,500 RPM speed range, a noticeable step up from the M12 model for boring holes in framing and driving larger fasteners. The head length stays at 3.75 inches, so the extra power does not cost you access in tight stud bays.
Like its smaller sibling, it uses an electronic clutch with 11 settings plus a drill mode, a 3/8-inch single-sleeve ratcheting chuck and an extended paddle switch on a multi-position handle, so you can keep a finger on the trigger from several grips. REDLINK electronics provide overload protection by coordinating the tool and battery. The CT kit pairs the tool with compact M18 batteries, which keeps the overall package shorter and lighter than full-size packs. This is the premium pick for anyone already committed to the M18 system who needs one right angle drill for both shop and site work.
Specs:
- Model: 2615-21CT kit (2615-20 tool)
- Battery platform: Milwaukee M18
- Speed: 0-1,500 RPM, variable
- Maximum torque: 125 in-lbs
- Chuck: 3/8-inch single-sleeve ratcheting
- Head length: 3.75 inches
- Clutch: electronic, 11 settings plus drill mode
- Weight: 2.75 lb, tool only
- Drilling capacity in wood: 3/8-inch twist bit, 1-inch spade bit
- Extras: extended multi-position handle, paddle switch, LED work light, REDLINK overload protection
Ryobi P241 18V ONE+ Right Angle Drill
The P241 is the budget pick in this roundup and the natural choice for the large number of users who already own Ryobi ONE+ batteries. On paper it is competitive with the 12V tools: 130 in-lbs of torque is the highest figure listed here, and the 1,100 RPM top speed sits comfortably in the middle of the group. The 3/8-inch chuck handles the twist bits, spade bits and driver bits used in typical cabinet and furniture work.
The trade-offs are the ones you would expect at this tier. It is sold as a bare tool, so budget for a battery and charger if you are new to the platform, and the specification sheet is simpler, with a single speed range and fewer electronic controls than the Milwaukee models. For occasional tight-space drilling and driving around the house and shop, though, the published numbers cover the job, and the low cost of entry makes it easy to justify as a specialty tool that only comes out when a straight drill cannot fit.
Specs:
- Model: P241
- Battery platform: Ryobi 18V ONE+, tool only
- Speed: 0-1,100 RPM, variable
- Maximum torque: 130 in-lbs
- Chuck: 3/8-inch
- Battery and charger: sold separately
Makita DA3010F Corded Angle Drill
The DA3010F is the only corded tool in this roundup, and it makes a different case: no batteries to charge, no runtime limits and a slim body that has been a staple for cabinet and finish work for years. The 4.0-amp motor drives a variable speed range of 0-2,400 RPM, the fastest top speed here, which suits small twist bits and hole saws in wood. Overall length is 10-5/8 inches and net weight is 3.1 lb, light for a corded tool.
The 3/8-inch chuck is a keyed design, so bit changes are slower than with the keyless chucks on the cordless picks, and the cord itself limits where you can work. Published capacities are 3/8 inch in steel and 1 inch in wood. A built-in LED light helps in dark cabinet interiors, and the paddle switch allows variable speed control. This is a mid-range to premium pick for shop-based users who work near an outlet and would rather never think about battery charge.
Specs:
- Model: DA3010F
- Power source: corded, 4.0-amp motor
- Speed: 0-2,400 RPM, variable
- Chuck: 3/8-inch keyed
- Drilling capacity: 3/8 inch in steel, 1 inch in wood
- Overall length: 10-5/8 inches
- Net weight: 3.1 lb
- Extras: built-in LED light, paddle switch, reversible
How to Choose a Right Angle Drill
Head length comes first. The whole point of this tool is access, so compare the front-to-back or head measurement before anything else. Heads around 3.75 to 4.0 inches fit between studs and inside most cabinet boxes; anything much longer gives back the advantage you are paying for. Pair a short head with short bits, or a right angle model with a deep hex pocket, to keep the total working length down.
Match the platform you already own. Every cordless pick here is sold as a bare tool or a small kit, and batteries are the real investment. A DEWALT 20V MAX user gets the most value from the DCD740B, Milwaukee owners should choose between the M12 and M18 models, and Ryobi ONE+ owners can add the P241 for very little. Buying into a new platform for one specialty tool rarely makes sense.
Check torque and speed against your work. Right angle drills are not high-torque tools; the models here range from 100 to 130 in-lbs. That is plenty for pilot holes, cabinet hardware and assembly screws, but not for large self-feed bits or heavy lag work. If you drill more than you drive, favor a higher top speed or a two-speed model like the DEWALT. If you drive many small screws, an electronic clutch, as on both Milwaukee models, protects against stripped fasteners.
Consider chuck style and controls. A ratcheting keyless chuck speeds up bit changes, while the Makita’s keyed chuck trades convenience for a slim head. Paddle switches and multi-grip triggers matter more on this tool type than on a standard drill, because you will often hold the tool sideways, overhead or one-handed.
Decide between cordless and corded. Cordless models go anywhere and dominate this category. A corded model like the DA3010F still earns a place in a fixed workshop where runtime is unlimited and the tool can live on a bench near the work.
FAQ
What is a right angle drill used for?
It drills holes and drives screws in places a standard drill cannot reach: inside cabinets, between wall studs and joists, under sinks and inside furniture frames. The chuck sits at 90 degrees to the handle, so only the short head needs to fit into the space instead of the whole drill body.
Is a 12V right angle drill strong enough for cabinet work?
Yes, for the tasks cabinet work usually involves. A 12V model like the Milwaukee 2415-20 delivers 100 in-lbs of torque with an electronic clutch, which covers pilot holes, hinge and hardware screws and flat-pack assembly. Step up to an 18V or 20V model if you regularly bore larger holes in framing lumber.
Should I buy a right angle drill or a right angle attachment?
An attachment converts a drill you already own and costs less, but it adds length, flex and an extra connection that can slip under load. A dedicated right angle drill has a shorter, rigid head, a purpose-built trigger and a clutch for driving. If tight-space work is occasional, an attachment is fine; if it is weekly, the dedicated tool is the better buy.
What size chuck do right angle drills have?
Most compact right angle drills, including all five picks here, use a 3/8-inch chuck. That accepts the twist bits, spade bits up to about 1 inch and hex driver bits used in cabinet and light framing work. Larger 1/2-inch right angle drills exist for heavy boring, but they are bigger tools built for a different job.
Conclusion
For most buyers, the DEWALT DCD740B is the right answer: two speed ranges, a 4.0-inch body and the deep hex pocket make it the most flexible tool here. Milwaukee M12 owners should take the compact 2415-21 kit, M18 owners the stronger 2615-21CT, and Ryobi ONE+ owners the budget P241. If your work stays in the shop and batteries feel like a chore, the corded Makita DA3010F remains a dependable, always-ready option. Choose by the batteries you own and the spaces you work in, and any of these five will reach the fasteners your regular drill cannot.
Related guides
Worth a look next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!