Updated Oct 18, 2026· 5 min read

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A hand saw can cut framing lumber, fence rails, and repair stock without a battery, extension cord, or much setup. For most buyers, the best value is a standard 20- to 22-inch crosscut handsaw with roughly 8 to 10 teeth per inch (TPI). It is inexpensive, versatile, and easy to replace. The catch: it takes more effort than a powered saw, and a dull or poorly chosen blade can make even a short cut frustrating.

Our Top Picks

  1. DEWALT DWHT20542 Cushion Grip Multi-sawOne Size14.3 x 3.1 x 1.3 inches0 pounds
    Check on Amazon
  2. 8-In-1 Multi Blades Hand Saw6.7 x 1.6 x 2.6 inches0.5 pounds
    Check on Amazon
  3. HAUTMEC 20" Hand Saw for Wood Cutting
    Check on Amazon

The best-value choice

Look for a traditional, rigid-blade handsaw intended for crosscutting, with a comfortable handle, a blade around 20 to 22 inches long, and teeth in the 8-to-10-TPI range. This is a sensible all-round setup for boards and common construction lumber up to about 2 inches thick. A 20-inch blade is easier to store and maneuver; a 22-inch blade gives you a little more reach and can make longer strokes.

For typical home use, there is little reason to pay extra for a premium finish or specialized handle. Spend enough to avoid a flimsy blade and rough grip, but prioritize tooth pattern and condition. A 20-inch, 8-TPI crosscut hand saw is a practical starting point for cutting lumber across the grain.

What the tooth count means

Lower TPI means larger teeth and faster cutting, but the cut is rougher and the saw can grab more readily. Higher TPI gives more teeth in contact with the wood, usually making it easier to control the cut and leave a cleaner edge, but it removes material more slowly. For everyday lumber, 8 to 10 TPI is a useful compromise. A 6-to-8-TPI saw can suit fast, rough cuts in thicker stock; a finer 10-to-12-TPI blade is better for thinner boards or cleaner work.

Check the label before buying: “crosscut” and “rip” describe different tooth shapes, not simply different levels of quality. Crosscut teeth are designed to sever fibers across the grain. Rip teeth work along the grain. A general-purpose crosscut saw is the more useful first purchase for most household projects.

Compare the main options

Saw type Best use Value trade-off
Traditional crosscut handsaw, 20–22 inches Boards, studs, and general lumber cuts Low purchase cost and versatile; requires effort and a steady stroke
Fine-tooth backsaw Short, accurate cuts in thinner stock More control, but too slow and shallow for routine thick lumber
Folding pull saw Portable repairs and occasional trim work Stores safely and cuts on the pull stroke; replacement blades add cost
Bow saw Green wood and rough outdoor cutting Good clearance around branches; awkward for neat cuts on flat boards

For a first saw meant specifically for lumber, a standard crosscut handsaw usually delivers the most work per dollar. A general-purpose 8- to 10-TPI handsaw is more appropriate than a small backsaw if you expect to cut studs or deck boards. Choose a folding saw when compact storage matters more than long, comfortable strokes.

When a cheap saw is fine

If you only need to shorten a few boards for a one-time project, an inexpensive fixed-blade saw is often enough. Look for a straight blade, teeth that are evenly formed and not visibly bent, and a handle that does not shift when held firmly. A low-cost saw may have a rougher finish or wear faster, but those drawbacks matter less when it will see occasional use.

Paying more can make sense if you cut by hand regularly. A better-balanced saw with a comfortable grip reduces fatigue, and a higher-quality blade is more likely to track straight. Still, price alone does not guarantee a better cut. A clean, sharp budget saw can outperform an expensive saw that has been stored loose in a damp shed.

How to get a clean, safe cut

Mark the cut on all visible sides of the board. Support the offcut so it cannot fall and pinch the blade, but leave the cut line free. Clamp the work if possible. Start with short, light strokes at the far edge of the mark; once the kerf is established, use longer strokes and let the teeth do the work. Keep the blade in line with the mark rather than forcing it sideways to correct a wandering cut.

For a 2-by-4, expect a hand cut to take several dozen strokes, depending on sharpness, wood species, and your pace. Wet, knotty, or pressure-treated lumber can take longer and bind more easily. If the blade repeatedly sticks, stop and check the support and kerf instead of twisting the saw. Twisting can kink a thin blade or spoil the cut. Wear eye protection, keep your free hand away from the blade path, and secure the lumber before cutting.

Buying seasonally and keeping value

Handsaws are not usually expensive enough for a large seasonal discount to justify waiting. Compare prices around spring project season and major holiday sales, but judge the deal against the saw’s tooth pattern, length, and build rather than a crossed-out list price. If you need only a couple of cuts, borrowing a saw or buying a basic one locally may be cheaper than paying shipping.

Store the saw dry and protect its teeth from other tools. Wipe off moisture after outdoor use; rust and damaged teeth can make a saw bind or cut crooked. Many budget handsaws have hardened teeth that are not practical to sharpen at home, so replacement is usually the sensible choice once they become dull or damaged. For frequent use, compare replacement cost and availability before choosing a blade system.

What to buy for your job

For ordinary lumber cuts and occasional DIY work, choose a rigid 20- to 22-inch crosscut handsaw with 8 to 10 TPI. Buy the cheapest version that feels secure in your hand and has a straight blade; step up only if you cut often enough to value better comfort and balance. If your work is mostly thin trim, get a finer-tooth saw instead. If you need fast, repeated cuts in thick lumber, a hand saw can do the job, but a borrowed or rented powered saw may save enough time and effort to be the better value.

P
Power Tools Outlet Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Value Hand Saw for Cutting Lumber Without…Check price on Amazon

Related guides

Browse all Deals guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.