Updated Nov 12, 2026· 15 min read

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

If you already own a circular saw and are wondering what to add next, the Thomas Flinn 10-inch gent dovetail saw is our top pick for fine joinery, and the Bahco Laplander is the one folding saw we would hand to anyone who camps or trims trees. Between them they cover the “specialty saw” gap that circular, jig and table saws leave open: small precise cuts by hand, packable cutting for the trail, clean cuts in steel with a chop saw, and angle cuts with a mitre box. This guide covers seven main picks, four extras, a short section on how to buy and judge antique hand saws, and a plain-language look at circular saw blade grades.

This article is research-based. We did not personally use these products. Specs come from the product listings and makers’ pages, and anything missing is marked “not listed”. Prices appear as tiers only.

Our Top Picks

  1. DEWALT 20V MAX* 7-1/4-Inch Miter SawOne Size25.25 x 19.88 x 15.69 inches1 pounds
    Check on Amazon
  2. DEWALT 20V MAX XR 10 in. Double Bevel25.75 x 19.35 x 20.75 inches
    Check on Amazon

Top Picks at a Glance

  • Best Overall (fine joinery): Thomas Flinn 10 in. Gent Dovetail Saw (brass back, 20 TPI).
  • Best Value Back Saw: Two Cherries 10 in. Brass Back Dovetail Saw.
  • Best Pull Saw: SUIZAN 7 in. Dozuki Dovetail Saw.
  • Best Folding Saw for Trails: Bahco BAH396 Laplander (7-1/2 in. blade).
  • Best Premium Camp Saw: Gerber Freescape Camp Saw (12 in. blade).
  • Best Metal-Cutting Chop Saw: Evolution S355CPSL 14 in. carbide-tipped blade chop saw.
  • Best Budget Angle Cuts: Stanley 1-20-600 Saw Storage Miter Box with saw.

Comparison Table

Product Best for Key specs (from listing) Watch for Price tier
Thomas Flinn 10 in. Gent Dovetail Fine joinery, small cabinets Solid rolled brass back, 20 TPI, 1-5/8 in. plate, walnut handle Needs careful use; a fine saw, not a rough cutter Mid-range
Two Cherries 10 in. Brass Back Value dovetail work 10 in., brass back (model 520-6020) Tooth count not shown in title Budget
SUIZAN 7 in. Dozuki Pull-stroke accuracy 7 in. rip and crosscut Japanese pull saw Thin blade can kink if forced Mid-range
Bahco Laplander Camping, trail work 7-1/2 in. blade, folding, ergo grip Short blade for large limbs Budget
Gerber Freescape Camp Saw Bushcraft, backpacking 12 in. blade, folding Higher cost for a hand saw Premium
Evolution S355CPSL Cutting steel stock 14 in. carbide-tipped blade, dry cut, miter to 45 degrees Heavy and loud; needs eye and ear protection Premium
Stanley 1-20-600 Miter Box Trim and picture frames Storage miter box with included saw Accuracy depends on blade condition Budget

1. Thomas Flinn 10 in. Gent Dovetail Saw: Best for Fine Joinery

  • 10 inch blade
  • Solid rolled brass back
  • 20 TPI (teeth per inch)
  • 1-5/8 inch wide plate
  • Walnut handle

Best for: dovetails, tenon shoulders and small box joints in hardwood. Skip if: you want a saw for rough cutting or green wood.

A back saw has a stiffening strip (the “back”) along the top edge of the blade, so a thin plate can cut straight without flexing. Brass is heavy, which adds forward weight and lets the saw settle into the cut under its own mass. That is the reason traditional joinery saws feel different from a cheap handsaw. 20 teeth per inch is a fine count: the cut is slow but leaves a neat, narrow kerf, which is ideal for tight joints.

The “gent” style in the name refers to a small, open-handled saw used for light work, as opposed to a full-sized carcass or tenon saw. If your work is drawers, small boxes and fine furniture, this is the saw you reach for most. It also comes in an 8 inch version in the same range. Don’t expect it to cut metal or nail-filled timber, as the teeth are intended for clean wood only.

Pros: classic joinery design; heavy brass back; fine teeth; comfortable handle. Cons: slower in thick stock; takes a bit of practice to start a clean cut; sharpening is a specialist skill.

2. Two Cherries 10 in. Brass Back Dovetail Saw: Best Value Back Saw

  • 10 inch blade
  • Brass back
  • Model 520-6020 in the listing
  • Tooth count: not listed in the title
  • Sibling reversible model 520-6080 also sold

Best for: someone starting out in hand-tool joinery who wants a metal back at a modest price. Skip if: you need to know the exact TPI before ordering; check the maker’s page.

Two Cherries is a long-established German hand tool brand, and its back saws are often recommended as an entry point to proper joinery work. The listing here confirms the brass back and 10 inch length, but not tooth spacing. Check the product page for whether the saw is filed for crosscut, rip or a combination, since that decides which cuts it does best.

If you are hesitating between this and the Flinn, the practical difference is likely in the fit and finish and in the plate thickness and handle, not in the idea of the saw. The Two Cherries is the cheaper way to find out whether you enjoy hand-cut joinery.

Pros: brass back at a budget tier; well-known brand; suitable for beginners; a reversible sibling exists. Cons: tooth details not in the title; handle shape may not suit large hands; may need a touch-up to cut perfectly straight.

3. SUIZAN 7 in. Dozuki Dovetail Saw: Best Pull Saw for Precision

  • 7 inch blade, rip and crosscut teeth
  • Japanese pull-stroke design
  • Thin blade with a stiffening back
  • Sibling 6 inch and 9.5 inch versions are also sold

Best for: clean, narrow cuts and people who find push saws hard to control. Skip if: you like a heavy push saw or work with very thick stock.

A pull saw cuts as you draw it toward you, which puts the blade in tension rather than compression. That is why the plate can be much thinner than a Western saw, giving a narrower kerf and less effort. Dozuki means “stiffened with a back”, so it is the Japanese relative of the western dovetail saw. The teeth are usually impulse-hardened and not meant for resharpening, so plan to replace the blade (or the saw) when it dulls. Check whether your model has replaceable blades on the product page, since that is not stated in the title.

Many woodworkers keep both a western back saw and a Japanese pull saw and choose by the job. If you are new to hand-sawing, a pull saw has a gentler learning curve for a straight line.

Pros: thin kerf; easy to start; excellent control; multiple sizes. Cons: blades are delicate and can kink; replacement blades matter; short length limits depth of cut.

4. Bahco BAH396 Laplander Folding Saw: Best Folding Saw for Trails

  • 7-1/2 inch blade
  • Folding design with an ergonomic grip
  • Green handle
  • Marketed for trail maintenance, wood processing and camping

Best for: a day pack, a camp kit or a truck toolbox where you need a saw that folds shut. Skip if: you will cut logs thicker than a few inches regularly.

The Laplander is a classic folding saw, and most bushcraft and camping guides mention it. The blade folds into the handle, which makes it safer to carry than an exposed blade. A 7-1/2 inch blade is short enough to pack but long enough to cut branches up to the size of a forearm if you are patient. Always check that the locking mechanism clicks firmly in the open position before you cut, and fold it shut before putting it in a bag.

It is also a sensible saw to keep in a vehicle. For pruning at height or large logs, a longer blade or a bow saw is the better tool. Replacement blades are commonly sold by the maker, but confirm that on the product page.

Pros: compact and light; good grip; proven design; budget tier. Cons: short blade; limited for large limbs; the folding joint adds a small amount of flex.

5. Gerber Freescape Camp Saw: Best Premium Camp Saw

  • 12 inch blade
  • Folding hand saw
  • Marketed for backpacking, hiking, camping, pruning and bushcraft
  • Weight and blade material: not listed in the title

Best for: campers who cut firewood regularly and want a longer blade without a bow saw’s bulk. Skip if: weight is your priority; a short folding saw is lighter.

A longer blade means longer strokes and fewer of them, which saves effort on thicker branches. It also means more blade to fold away, so the Gerber is bulkier in a pack than the Bahco. The extra price buys reach, not a different technique. As with any folding saw, keep your free hand clear of the blade path, use a stable log or stump to cut against, and clean sap off the teeth after use to keep the cut smooth.

If you prefer a fixed-blade saw for firewood, look at bow saws and pruning saws instead, which are larger but cut faster. For ultralight travel, the folding style is simply more convenient.

Pros: 12 inch blade; folding for safe carry; good for firewood; known outdoor brand. Cons: premium tier for a hand saw; bulkier than a short folder; details of blade replacement not listed.

6. Evolution S355CPSL 14 in. Metal-Cutting Chop Saw: Best for Cutting Steel

  • 14 inch carbide-tipped blade
  • Heavy-duty metal-cutting chop saw
  • Dry-cut design
  • Miter cuts to 45 degrees
  • Motor power and weight: not listed in the title we reviewed

Best for: cutting steel tube, angle and bar in a home workshop or small fabrication space. Skip if: you only cut wood; a miter saw or circular saw is a better match.

A cold-cut or dry-cut metal saw uses a carbide-tipped blade that turns slower than an abrasive chop wheel, so it makes a cleaner cut with fewer sparks and less heat. Chips are larger and cooler than abrasive dust, but they are still sharp and hot enough to hurt. Wear eye protection, hearing protection and gloves suited to handling cut metal, clamp the workpiece, and follow the maker’s manual for the blades and materials it supports.

This model sits in the premium tier. If you cut steel only occasionally, a metal-cutting circular saw or an abrasive chop saw may be a cheaper route. If you cut dozens of pieces a week and care about burr-free edges, a carbide-tipped dry-cut saw is easier to live with. Do not assume that a blade for one saw fits another: check the arbor size and maximum RPM in the manual.

Pros: clean cuts in steel; dry-cut design; large 14 inch capacity; miter adjustment. Cons: heavy; loud; premium cost; blades are specialist items.

7. Stanley 1-20-600 Saw Storage Miter Box: Best Budget Angle Saw

  • Miter box with built-in saw storage
  • Includes a saw
  • Angle slots: not detailed in the title, check the product page
  • Black finish per the listing; body material: not listed

Best for: picture frames, small trim and craft work where you want repeatable angles without buying a power miter saw. Skip if: you cut long baseboards or crown molding on a regular basis.

A miter box guides the saw so that each cut lands at a fixed angle, usually 90 and 45 degrees. The slot spacing and the saw’s sharpness decide how accurate the result is. A box with a built-in saw is the simplest option; a box without a saw lets you pair it with a better back saw, such as the dovetail saws above, and gives cleaner cuts.

Boxes with softer bodies can wear in the slots, and a dull saw will wander. Treat it as a light-duty tool for small work. For repeated cutting of trim, a powered miter saw is faster. If you want more precision from hand tools, a wood or metal miter box with a long back saw is the traditional upgrade.

Pros: low cost; storage keeps the saw with the box; easy to learn; portable. Cons: light-duty; slot wear over time; not for long stock.

Also Consider

  • Jorgensen 15 in. Hand Saw, 8 TPI. A coarse general-purpose handsaw for rough lumber; fine for yard projects when a back saw is too small.
  • Olympia Tools Saw Storage Mitre Box with 14 in. Backsaw. A comparable box with a longer saw and 90, 45 and 22-1/2 degree slots in the listing.
  • Diablo 7-1/4 in. 40-tooth ATB finish blade. A fine finish blade for a circular saw when you want cleaner crosscuts in hardwood and plywood. Check your saw’s arbor size first.
  • Evolution 14 in. blade for mild steel. A replacement blade for circular and chop saws that cut mild steel. Confirm the arbor size and maximum RPM against your saw before buying.

How We Chose

We selected products that map to the real “specialty” jobs people search for: fine joinery by hand, packable saws for camping and bushcraft, steel cutting with a carbide-tipped blade, and angle cutting with a mitre box. Each had to be currently sold, with enough listing detail to name a few specs. We checked the makers’ published information and general woodworking and trail guidance. We did not personally use these products, and we have not included ratings, review counts or ranking claims. We have not claimed blade compatibility or part numbers that we could not confirm. When the listing did not give the tooth count, weight or motor power, we said so.

We left out antique saws as product picks. Genuine antique tools are one-off items found at flea markets, estate sales and auctions, so there is no product to name or verify. The next section explains how to judge them instead.

Buying Guide

Choose by the cut, not the brand

Dovetail and tenon cuts want a fine-toothed back saw (roughly 14 to 20 TPI) or a Japanese pull saw. General cross-cutting wants a coarser saw (about 8 to 12 TPI). Rip cuts along the grain use teeth shaped like small chisels; crosscut teeth are shaped like knives. Many hand saws are filed for one or the other, so check the description. As a rule, more teeth per inch gives a smoother cut and slower progress.

Buying and judging antique and vintage hand saws

Old hand saws, including vintage back saws and panel saws, are plentiful and often cheaper than new premium saws. Look at the plate first: it should be straight, with no kinks or deep pitting along the tooth line. Light surface rust can be cleaned; deep pitting weakens the plate and makes the saw cut poorly. Check that the handle is solid, not cracked around the screws or “saw nuts”, and that the screws are present. Sight down the plate to look for bends. Expect to sharpen and set the teeth, or pay a saw sharpener to do it. Brass-backed vintage saws are collectible, so price depends on the maker and condition; compare several examples before paying a high price. We cannot verify any individual antique, so use the listing photos and ask the seller questions.

Folding saws: blade length, lock and teeth

Look for a positive lock in the open position, a blade that closes fully into the handle, and teeth that cut on the pull stroke or on both strokes. Triple-ground teeth cut fast in green wood. A 7 to 8 inch blade suits packing; 10 to 12 inches suits firewood. Always carry the saw folded and never cut toward your body or your leg.

Circular saw blade grades and carbide

Most circular saw blades for wood use carbide-tipped teeth. Carbide “grades” describe the hardness and toughness of the tooth material, but the grade labels are set by each carbide supplier and blade maker, so a number from one brand does not map directly to another. We therefore do not recommend choosing by grade number alone. Instead, match the blade to the material: wood, metal or masonry blades are different designs. Check the blade diameter, the arbor hole size and the maximum RPM marked on the blade against your saw’s specifications. A blade for cutting steel is made for a specific saw and speed; never fit a wood blade to cut metal, or a metal blade to a saw that runs faster than the blade’s rating.

Safety and care

Wear eye protection with any power saw and hearing protection with chop saws. Clamp material before cutting. Keep hand saws dry, wipe the plate with a light oil if you store them in a damp shed, and protect teeth with a guard. Replace folding saw blades that are bent or missing teeth.

Common Mistakes to Avoid

  • Buying a fine dovetail saw for rough construction cuts.
  • Forcing a Japanese pull saw and kinking the blade.
  • Choosing a blade by grade number instead of diameter, arbor and RPM rating.
  • Buying an antique saw with a bent or heavily pitted plate.
  • Using a metal-cutting saw without eye and ear protection.

Frequently Asked Questions

What is the best circular saw blade for cutting steel?

A blade designed for the material and your saw’s speed is the right choice, such as a carbide-tipped metal-cutting blade rated for your saw’s RPM. Always check the arbor size and maximum RPM in your saw’s manual before buying.

Are antique hand saws still worth buying?

Yes, if the plate is straight and not deeply pitted, and the handle is sound. Plan on sharpening them or paying for a sharpening service, and compare prices across several sellers.

What is the best antique back saw to buy?

There is no single best one; look for a straight plate, a solid brass or steel back and an intact handle. A well-kept saw from a recognized maker is usually a safer purchase than an unmarked one.

What is the best camping folding saw?

The Bahco Laplander is a strong all-round choice for compact carry, and the Gerber Freescape suits campers who want a longer blade. Choose by how thick the wood you cut tends to be.

What is the best cold saw for a home shop?

A dry-cut, carbide-tipped metal-cutting chop saw such as the Evolution S355CPSL is a common home-shop option. Confirm blade sizes and material limits in the manual, and wear eye and ear protection.

What is the best compound mitre box saw for small projects?

A hand mitre box with a long back saw, such as the Stanley or Olympia boxes, covers 90 and 45 degree cuts on small stock. For compound angles on trim, a powered miter saw is a better tool.

Is a bandsaw or cold saw better for cutting metal?

It depends on the work: a cold or chop saw gives quick, square cuts on stock, while a bandsaw handles curves and larger sections. Both need the right blade for the metal. For a first metal saw, ask about the material thickness and how often you will cut.

Which One Should You Buy?

For hand-cut joinery, start with the Thomas Flinn if you can spend more, or the Two Cherries if you want a cheaper entry. Choose the SUIZAN if you prefer pull saws. For camping and trail work, buy the Bahco Laplander, and move up to the Gerber for firewood. For steel, the Evolution chop saw is the specialist tool in this list. For trim and small frames, the Stanley miter box is the cheapest way to cut accurate angles. If you are buying an old saw, inspect the plate and handle before spending anything.

Sources

  • Thomas Flinn and Pax manufacturer product information
  • Two Cherries (Robert Larson) manufacturer product page
  • SUIZAN Japanese saw maker product page
  • Bahco and Gerber manufacturer product pages
  • Evolution Power Tools manufacturer product page and manual

Last updated: October 2026

P
Power Tools Outlet Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Specialty Saws: Dovetail, Folding, Chop and Mitre…Check price on Amazon

Related guides

Browse all Buying Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.